VNA Pallet Racking is one type of standard pallet racking.The difference is that Guide rail for three-way stacking forklift is installed on the ground at the bottom of the shelf. The biggest feature is that the aisle only about 1600mm-2000mm,which is much narrower than the conventional pallet rack, . But improve the space utilization of the warehouse.
1. The speed of cargo circulation is higher than that of general shelves. Roadway forklifts can operate at a height of up to 14 meters, and electronically controlled stacking cranes can even operate at higher places.
2. Special forklifts or cranes are needed. At the same time, other handling machinery is needed, and the Sunnyrack shelf for setting up and transferring stations not only has the function of storing trays, but also has the function of supporting and strengthening the handling equipment.
3. The requirements for structural strength and tolerance are extremely strict. Comprehensive design and installation must be considered. Semi-automatic auxiliary control is required to ensure accurate positioning of the pallet on the high-level cargo space.
Application requirements of narrow aisle shelves rack in storage or logistics centers:
1. A high level of logistics efficiency is required.
2. The quantity of stored goods is large, the goods enters and exits frequently and there are high requirements for the selection of goods.
3. An independent storage forklift can be used for the forklift. There is no plan to use the storage forklift to drive outside to perform other tasks.
4. Storage and logistics centers urgently need to increase the number of storage spaces or require a certain amount of storage.
5. The available net height of the warehouse is higher than 8M.
Notes on the use of narrow aisle shelves rack?
1. The use of heavy shelves must be top-heavy: the principle of placing light goods at the high level and heavy goods at the bottom.
2, to prevent overload: the weight of each layer should not exceed the maximum load capacity of the shelf.
3. Anti-collision: During the operation of the forklift, it should be handled as lightly as possible to prevent impact on the shelf.
4. When there are goods above the shelf, the operator should not directly enter the bottom of the shelf.
5, to prevent the use of non-standard floor board (card board), trays, etc. on the shelf, the Sichuan word bottom is most suitable.
When the shelf height exceeds eight meters, corresponding loading and unloading machinery is required. Therefore, the total channel area required is larger, and the storage density is smaller than that of other systems. The heavy-duty storage shelves can realize the quick access of various pallets, and the unit cargo volume can reach 2000KG, which can adapt to various types of pallets and Hercules shelves. The height of the beam can be adjusted according to the requirements of the cargo size. The goods are in large circulation, easy to follow and quick. Heavy-duty shelves have the lowest cost and can be quickly installed and folded.