Pallet Rack Is The Best-selling Varieties Of Heavy Shelves

What is a pallet rack? Where is the benefit of tray shelves? Where is the tray shelf cheaper? Today we heavy shelves manufacturers tell you this knowledge

First of all, we have to understand what is the tray shelves?

Pallet Shelves Store pallet stocked units, work with alley stacker and other storage and transportation machines. High-rise shelves and more use of the overall structure, usually by the steel welded shelves (with trays), through the horizontal and vertical beams and beams and other components connected together. The side of the gap, taking into account the accuracy of the parking in the original location of the goods, the palletizing machine stop accuracy, stacker and shelf installation accuracy; cargo support width. , Must be greater than the side of the gap convex, so that one side of the goods in the unsupported state.

Currently only with the freedom of the combination, easy to disassemble and move, according to the height of the item push code, adjust the beam position, but also can be called adjustable pallet rack. Pallet Shelves Store pallet stocked units, work with alley stacker and other storage and transportation machines.

The most commonly used, economical, safe one of the best shelf types; Selectivity 100%; Up to 11 meters, and the beam can be 75mm and 50mm spacing up and down arbitrarily adjusted; Frames and beams can be based on different specifications of the tray and weight To design; roadway size according to the use of the forklift to design; increase the fence, support, rear gear and other ancillary accessories can achieve more convenient and safer results.

Tray shelves

High-rise shelves and more use of the overall structure, usually by the steel welded shelves (with trays), through the horizontal and vertical beams and beams and other components connected together. The side clearance takes into account the parking accuracy of the goods in the original position, the stopping accuracy of the stacker, the installation accuracy of the stacker and the shelf, etc. The width of the goods support must be greater than the width of the side clearance so that the cargo side is in an unsupported condition.

The use of free combination, easy to disassemble and move, according to the height of the item push code, arbitrary adjustment of beam position, also known as adjustable pallet rack.

Pallet rack (also known as the beam rack system, pallet rack, cargo shelves, pallet shelves, steel shelves), is more popular, more economical, the most widely used form of a shelf, and good security. Because of its 100% picking, it is especially suitable for warehouse storage of a wide range of pallet-type goods.

In the selection of beam rack, you need to consider the size of pallet (or bin), the weight of the position and the stacked layers, in order to determine the appropriate columns and beams. The selection of forklift or stacker will directly affect the storage density of the goods.

The main components of the pallet rack system consist of columns and beams, which are equipped with supporting fittings such as spacer, stencil, safety net and safety rail according to various actual storage conditions.

Column: There are two columns and cross struts, diagonal through the use of screws connected. There are four kinds of cross section of Huade column in order to meet different bearing requirements. Each column of 50mm (or 75mm) prefabricated water drop holes to achieve the connection with the beam, so the beam can be 50mm (or 75mm) for Unit up and down adjustment shelf height.

Beam: There are two post cards welded together with the beam rod, beam rod using two special C-shaped steel bite, this structure makes the upper and lower beam surface double the thickness of the material, so that the direction of the beam load direction Greatly increase the moment of inertia, make full use of the anti-load capacity of the beam, with the characteristics of light weight, large carrying capacity and good economy. In order to ensure the shedding of the beam under the abnormal external force, the safety-protection safety pin of the beam and the column is specially designed to ensure the safety of the use.